MK Machinery & Supply - Accessory Machines and Tools

Lockformer 6020 Beader

	The latest design in beading technology is now available. Since beading is consistently replacing cross braking to stiffen ductwork against vibration and “bellying,” the 6020 Beader combines structural integrity with demanding performance qualities. It forms “offset” beads on 12" centers. Adjustable entrance gauge bars allow fittings or sheets to be beaded from 24" to 60" widths.

	Features	Adjustable entrance gauge bars	Profiles
	-Speed: 50 feet per minute. -Capacity: 5' wide material, 20ga. maximum.
Click for more info

Lockformer 6016 Beader

	When the job calls for heavy-duty “giants,” this machine tool is it. With this 6016 Beader, only one operator is needed to produce SMACNA-approved beads 4-5 times faster than cross braking. It forms five beads, on 12" centers, adjustable to 1/8" depth. Maximum capacity is 16 gauge material and one operator can easily handle sheets up to 60" wide.

	Features	Gauge bars	Profiles
	-Speed: 55 feet per minute. -Capacity: 5' wide material, 16ga. maximum.
Click for more info

Lockformer Cheek Bender

	A two-way trunnion keeps the bending bar in position at the starting point to assure perfect bends throughout the entire length. Mounting bolts are included. 20 gauge maximum.



Call for more info

Lockformer Hand Cleat Bender

	A rugged tool designed to easily manage the laborious task of forming the drive cleat hem. Choice of lengths: 18", 24" or 30". 20 gauge maximum.



Call for more info

Lockformer Easy Edger

	Turn perfect flanges on elbows or other curved fittings as fast as you can notch them. No gauge to set. Hand clamps to any bench. 20 gauge maximum.



Call for more info

Lockformer Cold Sealant System

	These portable cold sealant units (available in both 5-gallon and fixed 55-gallon sizes) should be factory installed to all Lockformer rollforming machines and are available with one to four gun systems. Optical eye triggers are included to adjust flow. Snuffer devices are also included to eliminate leakage in the shut-off position. From pump assemblies to nozzles, everything is quality engineered for top performance. The sealant itself is specially formulated to produce perfect, non-toxic, flame-retardant sealing beads to ductwork in-shop or on-site. Beads that won’t crust or shrink — even under temperature conditions.



Call for more info

Lockformer 24S Band Saw

	Specifically designed for the sheet metal shop, this simple, rugged, cast-iron body design will handle virtually any cutting job. Three blade speeds (100, 600 and 3000 fpm) cut just about any material smoothly, accurately and quickly, even on complicated patterns, whether run through singly or stacked an inch high. There’s no lead-off; the blade won’t twist — even small radius cuts — and work is easy to back out. Other enhanced features include a full 24" throat and three 14" wheels instead of the typical 24" or 26" two-wheel layout. As a result, you can cut a 4-foot-wide piece of material right down the center.

	Features
	-Full 24" throat -Three 14" wheels -Three blade speeds
Call for more info

Lockformer Galv-Off

	Softens and dissolves galvanizing buildup on forming rolls and press dies. Lubricates as it cleans. Handy 12 oz. aerosol size.

	12 ounce aerosol size