MK Machinery & Supply - Round/Oval Machines

Lockformer Collar Maker

	Notch, bead, crimp and roll complete round starting collars, 3" to 14" in diameter out of 24 to 30 gauge galvanized - in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" witch blanks with simple movement of the crimp roll.

	Collars	Crimp roller	Features
			•24-30 gauge capacity. •Speed: 30 ft./minute.
Click for more info

Lockformer Spin Collar Maker

	Make your own spin collars in minutes. Just cut galvanized stock (24 gauge & lighter) wo width and length, set the diameter from 4" to 16", and push the blank against the automatic stop. A synchronized die notches the lead edge for easy spin-installation on the job site. The notched piece is then pushed past the stop, feeding the part into the rollformer and finally into the automatic crimping and curling operations. Two models are available - Model 6 (2" to 6") and Model 12 (2" to 12").

	Spin Collar	Features
		•24-30 gauge capacity. •4" - 16" curling diameter. •Speed: 40 ft./minute.
Click for more info

Lockformer Round/Oval Pipe Machine

	Available in either 7-station or 9-station (for pre-curl) machines which fabricate both male and female forms for Reeves-type snap lock. Each lock is formed on flat sheets with no restrictions on the diameter of the finished pipe.

	Round/Oval Pipe Machine Forms

Click for more info

Lockformer Automated Furnace Pipe Rolling System

	Save time and money by rolling your own pipe. Lockformer's advanced system produces oval or 3" to 14" diameter round pipe from 2' to 10' in length out of 24 to 30 gauge galvanized steel with the turn of a dial. Just feed blank material into the 9-station duplex rollforming machine where male and female configurations are formed. The blank is then delivered to a two-stage conveyor where it's oriented and fed in a perfect 90° angle to the pipe-rolling machinery. That's all there is to it! The pipe is completely finished and ready for packing into shipping bundles.

	Pipe Roll	Automated Furnace Pipe Rolling System Forms

Click for more info